Inspected Liberty Pumps StormCell Battery Backup System that was previously installed by another contractor. System appears to be functioning properly with AC power and battery showing full charge status (131 displayed on digital readout). No adjustments needed to the 10 amp charger unit or 12VDC connections at this time.

Responded to morning service call regarding clogged catch basin requiring cleaning. Upon inspection, accessed the circular metal drain cover in concrete floor area of basement utility room. Cleaned debris accumulation around perimeter of catch basin to restore proper drainage function.

Responded to service call for tankless water heater displaying error code E110 with no hot water output. Inspection revealed significant corrosion and mineral buildup at drain pipe connection causing system failure. Replaced damaged valve assembly and pipe fitting, cleaned mineral deposits from affected components, and restored proper water flow. System tested successfully with error code cleared.

Responded to early morning service call requiring building shutdown. Addressed severe mineral buildup and hard water staining in bathroom sink. Successfully cleared clogged drain and restored proper water flow, ensuring minimal disruption to building operations.

Responded to service call for low water pressure and pipe banging issues. Inspected plumbing system including insulated vertical pipes, copper lines, and pressure tank with attached pump. Diagnosed and adjusted the yellow flow control valve to restore proper water pressure and eliminate water hammer effect causing the sporadic banging noises.

Responded to service call for kitchen sink with standing water and toilet with bowl refill issues. Upon inspection of the TOTO toilet, identified low water level in tank and malfunctioning float mechanism. Cleared kitchen drain clog and adjusted toilet fill valve system, replacing worn flapper valve to restore proper bowl refilling functionality. Both fixtures now operating normally.

Performed assessment for proactive replacement of existing GE SmartWater unit with recommended 50-gallon Bradford White or Rheem Professional water heater (10-12 year warranty). Estimate includes removal and disposal of current unit, permit/inspection as required by Chicago code, new water supply flex connectors, new gas flex connector, and complete professional installation by licensed and insured technicians.

Successfully installed a Navien wall-mounted tankless water heater system with proper PVC venting and copper pipe connections. Unit was fully tested with all internal components verified for proper operation, including electronic control panels and circuit boards. Installation complete with all necessary valves and fittings against cinder block wall in utility area.

Conducted site assessment of commercial toilet installation in public restroom facility. Documented existing conditions including wall-mounted flush valve system, water staining on tile wall behind fixture, and overall condition of porcelain bowl and U-shaped seat. Provided customer with replacement options based on evaluation of current installation requirements.

Conducted a comprehensive estimate for replacing an aging Whirlpool water heater installed in the utility room. Inspected the existing plumbing configuration, which includes a mix of galvanized steel, copper, and black pipes with multiple connection points and a prominent blue valve handle. Noted the current unit sits on a metal catch pan and would require coordination with the adjacent heating system components when performing the replacement.

Successfully installed a new tankless water heater system, including proper venting through the existing brick exterior wall using PVC piping with appropriate elbow joints and grid-covered termination. Completed all necessary plumbing connections to the home's existing cast iron and copper pipe infrastructure in the utility area, ensuring proper drainage and code-compliant installation.

Conducted site assessment for washer and dryer hookup installation in designated corner space. Evaluated existing electrical outlets and ventilation. Location has suitable wall space, flooring, and window access for proposed appliance installation, though additional plumbing connections will need to be established as current setup lacks required water supply and drainage systems.

Inspected RO Technologies 35RN water treatment system installed by Goode Plumbing that is currently under warranty. Determined that replacement parts are required beyond just the battery as initially assumed. Will contact customer when necessary materials are in stock to complete the warranty service.

Responded to a service call for a water heater leaking from the base. Upon inspection, found the tank had failed with visible water damage to surrounding floor and walls. Replaced the existing water heater with appropriate size unit, installed new supply lines, and tested system for proper operation and absence of leaks.

Replaced worn bathroom sink faucet cartridges exhibiting significant corrosion and buildup. Conducted diagnostic assessment of two toilets with flushing issues and replaced necessary components to restore proper function.

Responded to high water bill complaint in multi-unit building (9 condos, 1 commercial unit). Inspected decorative stone-mounted shower fixtures where two star-shaped control handles were installed in black marble. Identified water leak at fixture connection points with visible water marks on the stone surface, requiring adjustment of fittings to resolve the ongoing water loss issue.

Successfully cleared a clogged kitchen sink drain system that was affecting multiple connected appliances (dishwasher and washer/dryer). Inspected the P-trap assembly and associated PVC drain pipes, confirming proper function of the plumbing configuration with no signs of leaks, corrosion or damage to the brass fittings or water supply lines.

Inspected drainage system in unfinished basement area, documented PVC pipe installation and concrete substrate condition. Identified significant floor deterioration with visible cracking and fragmentation. Client has paid initial deposit, with additional work scheduled to address the drainage issues and restore damaged concrete surfaces.

Responded to service call for multiple slow drains affecting kitchen sink, bathroom sink, and tub. Inspected bathroom sink plumbing and under-sink cabinet area to diagnose drainage issue. Successfully cleared blockage in all affected fixtures, restoring proper drainage throughout the home.

Inspected outdoor hose spigot on third-floor condo unit that had previously leaked/burst during winter. Identified corrosion on the decorative wheel handle valve and water damage to surrounding structure. Replaced damaged section of pipe, installed new frost-proof hose bibb with vacuum breaker to prevent future freezing issues, and secured all connections to restore proper functionality.