Inspected existing sump pump system in basement that customer reported as non-operational since property purchase. Observed complete pump assembly including PVC discharge piping with green check valve and multiple connection points. Diagnosed failed SUMPRO unit and recommended replacement to restore basement water management functionality.

Inspected main valve leak issue that occurs during operation. Confirmed that city has located the boundary box and completed their portion of work. Customer is awaiting tree removal before final resolution. Documented condition of exterior utility markings and interior plumbing setup with valve installation.

Conducted site evaluation for new restaurant installation requirements. Assessed location for hand wash sink (15"×17") installation and documented existing bathroom fixture conditions. Examined commercial kitchen space for gas line connections needed for range, fryer, and flat top equipment, noting current construction status with installed exhaust hood and protective coverings on kitchen equipment.

Performed scheduled building water shutdown from 8-12pm to address plumbing issues. Inspected bathroom fixtures including corroded tub/shower faucet and spout showing significant wear. Also examined toilet tank with severe mineral deposits and discoloration requiring attention. Work sold by Brian.

Responded to service call for failed sump pump in basement. Inspected system and determined pump required replacement. Installed new sump pump and verified proper operation. Placed industrial dehumidifier to address residual moisture in the affected area.

Performed flood control pump replacement in client's partially flooded manhole access point, along with comprehensive camera inspection and line rodding services as scheduled. Successfully replaced aging system components, addressing cracked concrete and seams in the circular structure. Job sold by Jon.

Inspected 30-gallon Rheem water heater in utility closet for replacement estimate. Unit appears functional but at end of service life based on age. Also noted loose kitchen faucet requiring adjustment. Recommendations provided for appropriate replacement options considering existing space constraints and current plumbing configuration.

Conducted inspection of aging metal plumbing infrastructure in basement area, documenting significant oxidation and rust formation on pipe surfaces. Identified multiple connection points requiring maintenance, including T-junction and control valve. External inspection of sidewalk area completed with documentation of utility access point and building connection where vertical service pipe enters structure.

Responded to client Basi for a callback requested by Bryan. Upon arrival, conducted exterior inspection of the property including access areas and drainage zones. Documented significant leaf accumulation around entrance stairs and perimeter fence which could potentially obstruct drainage systems and create water flow issues. No active plumbing issues were identified during this assessment visit.

Responded to callback for Jon. Performed camera inspection of sewer line, documenting conditions at 59'3" and 66'1" depths where potential blockage or damage was identified. Images revealed rough, irregular surfaces with debris accumulation in the pipe interior.

Conducted diagnostic assessment on sump pump system due to reported water backup issues. Utilized electronic utility detection equipment to locate and evaluate the drainage system components, identifying the source of the malfunction.

Performed annual water heater maintenance service. Inspected copper supply lines and fittings for signs of corrosion or leaks. Examined TPR valve, connections, and verified proper function of shut-off valves. All components showing normal aging but remain in functional condition with no immediate concerns identified.

Located and repaired a water leak from second floor shower that was affecting ceiling below. Conducted thorough inspection of shower plumbing fixtures and determined source of leak. Completed necessary repairs to stop water intrusion that had been occurring for several weeks.

Inspected sewer line backup situation where previous service provider was unable to properly diagnose due to water filling the line. Assessed the main drain cleanout access point in basement utility area to determine whether blockage responsibility falls on homeowner's side or city side of the sewer connection.

Responded to callback for customer Basi at request of Kevin. Inspected water heater installation in basement utility area, noting proper copper pipe connections and valve placement. Examined ceiling PVC drainage system, identifying signs of previous water damage on surrounding wooden joists and planks. Documented installation conditions with photos for service record.

Responded to priority service call for flooding and non-functioning water heater. Inspection revealed clogged clay drainage pipe. Successfully cleared blockage using hand tools and verified proper water flow restoration. Documented condition with photos showing access point and interior pipe condition before completion.

Responded to service call regarding toilet leaking at base. Visual inspection conducted of bathroom and toilet fixture. No visible water damage or active leaking observed at time of inspection, but customer reported intermittent leakage. Diagnostic testing and assessment completed.

Conducted water leak investigation in bathroom, focusing on toilet area. Performed visual inspection of toilet components and surrounding fixtures. No active leaks identified during inspection; toilet appears to be functioning properly with no signs of water damage around base or supply line. Photos documented for reference.

Conducted inspection of reported knocking copper water lines in utility room containing Rheem "Perfection" water heater system. Examined extensive copper pipe network with brass fittings/valves, noting presence of blue pump/motor component mounted on copper piping. Provided customer with replacement and repair options to address noise issue while evaluating potential causes of pipe knocking.

Resolved shower/tub drainage issue by removing broken drain stopper that was stuck in closed position. Accessed plumbing through wall access point to inspect and repair the antiquated spring mechanism. Replaced complete drain open/close assembly with new components, ensuring proper functionality and water drainage.