Installed Liberty PC257-441 cast iron sump pump battery backup system with integrated controller and high water alarm. System includes backup pump and battery to provide emergency pumping capacity during power outages. Customer advised that battery requires replacement every three years to maintain system integrity and prevent damage to components.

Responded to a mainline drain blockage and performed rodding service to clear the obstruction. Utilized professional drain cleaning equipment including motorized auger to snake and clear the main sewer line through the basement cleanout access point. Successfully restored proper drainage flow through the system.

Completed installation of new garbage disposal unit under kitchen sink. Performed all necessary plumbing connections including P-trap assembly and drain line attachment using proper tools and compression fittings. Provided customer with manufacturer's usage guidelines detailing acceptable and prohibited items for disposal operation to ensure proper unit function and longevity.

Responded to water leak complaint with water leaking through ceiling when toilet flushes. Upon investigation, identified severely corroded and rusted toilet flange as the source of the leak. The deteriorated flange seal was allowing water to bypass the wax ring during flushing, causing water infiltration through the floor and into the ceiling below. Documented existing conditions including compromised flange integrity, standing water at the base, and water damage to surrounding tile and grout.

Performed inspection and assessment of commercial HVAC and mechanical systems. Evaluated Copper-Fin II unit in mechanical room, documenting equipment condition, safety labels, and operational specifications. Inspected extensive piping network including insulated white pipes, circulating pumps, valves, and associated connections throughout the mechanical space. Photographed equipment configuration and system components for service records and future reference.

Responded to service call for continuously running toilet. Upon inspection, identified worn flush valve assembly and deteriorated flapper causing constant water flow into tank. Replaced faulty flush valve components including flapper seal and refill tube, adjusted float mechanism to proper water level, and tested system to confirm proper operation and water shutoff.

Conducted callback inspection of bathroom sink plumbing system to assess requirements for re-piping work. Documented existing vanity configuration including white cabinet with cream countertop, chrome faucet fixture, and current drain assembly. Examined under-sink plumbing components including white PVC drain pipes, chrome P-trap, dual chrome shut-off valves with flexible braided supply lines, and wall-mounted connections. Photographed visible cabinet deterioration and water staining on interior surfaces indicating previous moisture issues. Prepared documentation for follow-up estimate on complete re-piping of bathroom sink to restore full service functionality.

Completed installation of a new two-piece white porcelain toilet in residential bathroom with brown and beige subway tile walls and tan ceramic floor tiles. Toilet was properly positioned, secured, and tested to ensure proper function and no leaks upon completion.

Responded to service call for leaking garbage disposal and kitchen faucet repair. Removed and replaced defective garbage disposal unit with new black disposal, securing mounting assembly to sink drain with proper flange connection. Connected discharge line to existing P-trap configuration using white PVC drainage pipes. Verified electrical connection and tested unit for proper operation and drainage. Inspected kitchen faucet and replaced worn cartridge to restore proper function and eliminate dripping. Tested all plumbing connections under sink for leaks, confirmed proper water flow, and verified garbage disposal grinding operation. All systems functioning correctly upon completion.

Responded to service call for water heater inspection and low water flow complaint at kitchen faucet. Upon arrival, performed comprehensive inspection of tanked water heater system, examining internal components including copper piping manifold, electrical connections, brass valves, and shutoff mechanisms. All connections, wiring, and heating elements were inspected for proper operation and safety compliance. Water heater found to be functioning within normal parameters with no immediate issues identified. Investigated low water flow concern at kitchen faucet and traced issue to whole-house water filtration system installed on main copper supply line. Inspection revealed GE brand inline filter housing with severely discolored and clogged filter cartridge, exhibiting brownish-yellow sediment buildup that was significantly restricting water flow throughout the residence. Filter cartridge had reached end of service life and required immediate replacement. Documented existing filter model

Completed follow-up water quality testing appointment. Performed comprehensive water analysis testing for copper and iron levels using standardized test kit with color comparison charts to determine water treatment system requirements and assess current water conditions.

Responded to service call for broken sewer main at century-old residential property. Performed on-site assessment of reported cracked sewer line and documented existing conditions in landscaped area and interior utility space near floor drain. Conducted visual inspection to evaluate extent of damage and determine scope of replacement work required, with recommendation for camera inspection to fully assess underground pipe condition before providing repair estimate.

Performed annual preventative maintenance water heater flush on tanked system in 16-year-old residential property. No active issues or symptoms reported by homeowner prior to service. Drained sediment and mineral buildup from tank bottom through drain valve to restore heating efficiency and extend equipment lifespan. Inspected temperature and pressure relief valve for proper operation. Flushed system until discharge water ran clear, indicating complete removal of accumulated sediment. Refilled tank and verified proper operation of all components. System restored to normal operating condition with improved thermal efficiency expected from sediment removal.

Responded to plumbing service call and performed diagnostic assessment of tankless water heater system. Identified required replacement parts and coordinated order through supply vendor. Documented existing installation configuration including copper supply lines, gas connections, and associated valving. System awaiting parts delivery to complete repair work.

Coordinated with building engineer to shut off and drain water supply to the building. Replaced aging 1/2" IP x 3/8" compression angle stops serving the kitchen sink, including installation of a compression tee on the cold water angle stop to maintain water feed for the refrigerator. Removed existing kitchen faucet experiencing low water pressure and installed customer-supplied Delta single-hole faucet with proper connections. Upon building water system repressurization, tested all fixtures for proper functionality and verified adequate water flow and pressure. All connections sealed properly with no leaks detected at angle stops or faucet installation points.

Completed garbage disposal replacement beneath kitchen sink. Disconnected existing unit from drain assembly and electrical supply, removed old disposal, and hauled away for proper disposal. Installed new garbage disposal unit with secure mounting to sink flange, connected discharge drain line to existing P-trap configuration, and verified all plumbing connections for proper seal and alignment. Restored electrical connection, tested unit operation for proper function and drainage, and confirmed no leaks at mounting points or drain connections.

Performed camera inspection of residential plumbing system for newly installed shower stall with subway tile walls and terrazzo flooring. Documented drain system functionality and verified proper installation of central floor drain with chrome cover, as well as secondary floor drain location marked for future service work.

Completed installation of new plumbing piping system in basement utility area, including PVC drainage lines, copper water supply lines, and associated mechanical connections. Installed piping runs across ceiling joists with proper support and secured all connections to existing HVAC system and mechanical equipment, ensuring proper routing and clearances per code requirements.

Responded to service call for bathtub drain replacement. Removed existing deteriorated drain assembly showing significant tarnishing and discoloration. Installed new drain kit with chrome finish, including updated gaskets, drain cover, and connecting hardware to ensure proper seal and function. Tub fixture remained in place with only drain components replaced as requested.

Conducted site assessment for battery backup sump pump installation at new residential condo building. Evaluated existing sump pump system including discharge piping with quiet check valve, electrical connections, and sump pit configuration to determine optimal integration point for emergency backup power system to ensure continued operation during power outages.