Camera inspection revealed severe misalignment between the private sewer and city sewer connection beneath the street, causing frequent backups and fill-ups. The problem location was identified and marked for excavation, with no existing 6" cleanout access available for proper maintenance. Excavated front yard at the flagged location to expose the 6" clay main sewer line. Removed approximately 5 feet of deteriorated 6" clay tile sewer pipe. Installed new 6" PVC sewer section with 6" cleanout access for future maintenance capability. New pipe was properly bedded in gravel to prevent settling and sinking. Performed hydrojetting of the main sewer line from the new cleanout to thoroughly clean the system. Provided video inspection recording to the homeowner documenting the sewer line condition. Backfilled excavation area, performed complete job site cleanup, and hauled away spoil material. Obtained all necessary permits and coordinated required inspections. Scheduled and completed Private

Conducted comprehensive plumbing estimate and inspection of exposed piping systems in basement and crawl space areas. Documented existing pipe conditions including visible corrosion and oxidation on older metal trap configuration, assessed structural exposure of plumbing infrastructure, and photographed utility connections and mounting fixtures for piping estimate proposal.

Responded to service call for outdoor spigot experiencing reduced water flow and air sputtering. Accessed ceiling cavity to inspect supply lines feeding the exterior fixture. Found compromised piping connections causing air infiltration into the water supply system. Repaired copper supply line connections and eliminated air gaps in the plumbing assembly, restoring full water pressure and eliminating sputtering at the outdoor spigot.

Completed initial plumbing service consultation and site assessment for residential property. Documented exterior conditions and property layout for scheduling upcoming repair work. Customer approved recommended repairs and project has been queued for installation scheduling.

Completed installation of new tanked water heater system with associated plumbing connections and recirculation pump. Installation included proper PVC supply piping with shut-off valve, insulated hot water lines, and recirculation pump assembly with check valve secured by stainless steel clamps. Floor protection was maintained throughout the installation process to prevent damage to tile flooring in the utility area.

Conducted comprehensive plumbing assessment in basement utility area to evaluate deteriorated PVC piping system requiring replacement. Documented existing conditions of main drainage lines, utility sink connections, and mechanical room plumbing infrastructure through photographic evidence. Prepared detailed estimate for large-diameter PVC pipe replacement, including evaluation of copper supply lines, drain connections, and integration with existing water heater and utility sink systems in the mechanical space.

Responded to a clogged kitchen sink backup in a residential unit. Upon inspection, found the double-basin stainless steel sink experiencing drainage issues. Cleared the blockage from the drain line and verified proper water flow through both basins. Inspected the under-sink plumbing connections and main water supply system in the basement area to ensure no additional issues with the drainage system or related plumbing infrastructure.

Responded to service call for toilet installation and leak investigation. Upon arrival, assessed bathroom with active leak from upper level bathroom penetrating into lower level bathroom ceiling. Inspected existing bathtub fixtures and surrounding tile work for source of water intrusion. Examined plumbing connections, supply lines, and drain assembly at toilet base. Documented existing conditions including bathroom layout, tile surfaces, and fixture placement. Customer has two toilets requiring installation and leak repair work pending approval to proceed with recommended repairs.

Responded to a multi-unit plumbing emergency where a failed lead seal in the upper unit shower was causing water intrusion into the lower unit shower below. Accessed the affected area using a 6-foot ladder and cut out the compromised section of 2-inch drain pipe and trap assembly. Removed the deteriorated lead seal, reinstalled the shower trap with a new rubber seal, and secured all piping with appropriate hangers to prevent future movement. Conducted thorough water testing to verify the repair eliminated the leak between units, with cosmetic ceiling and wall repairs in the lower unit to be completed by property owner.

Serviced multiple plumbing issues including garbage disposal repair, toilet fill valve adjustment to resolve continuous running condition, and evaluated bathroom sink drain flow. Inspected and repaired InSinkErator garbage disposal unit, adjusted toilet tank components including float mechanism and flush valve assembly to restore proper fill cycle operation, and assessed bathroom sink drainage system for obstruction or slow flow issues.

Responded to service call for backing up toilets where previous contractor had diagnosed a cracked sewer line via camera inspection. Performed independent video camera inspection of the main sewer line to provide second opinion on reported damage. Used RIDGID SeeSnake camera system to thoroughly examine pipe interior conditions and verify presence and extent of any structural defects. Documented findings with video footage and photographic evidence for customer review and informed decision-making regarding necessary repairs.

# Drain and Sewer Estimate - Plumbing Relocation Assessment Conducted a comprehensive site evaluation for relocating sink plumbing from one side of the residence to another. Assessed existing plumbing infrastructure, including water supply lines and drainage connections visible behind the toilet area. Documented current conditions showing significant floor deterioration, water damage, and potential mold growth in the bathroom space, which will need to be addressed during the relocation process. Evaluated wall-mounted shut-off valves and existing supply line configurations to determine optimal routing for the proposed sink relocation. Photographed plumbing fixtures and new installation materials on-site to develop accurate scope of work for the relocation project.

Replaced defective ball valve on exterior water line accessed through recessed utility box in exterior wall. Restored proper water flow control and verified system operation upon completion.

Installed new washing machine supply valves in recessed wall outlet box with hot and cold water connections featuring red and blue handled shutoff valves. Connected flexible braided stainless steel supply hoses to valves to complete the fixture installation. Building water supply was shut down at noon to facilitate safe installation of the plumbing fixtures.

Responded to service call for inoperative garbage disposal unit. Upon inspection, found InSinkErator Badger 500-2 model disposal jammed due to foreign object obstruction. Removed obstruction from grinding chamber, tested motor function and reset mechanisms, and verified proper operation of disposal unit. Confirmed drainage system and P-trap connections secure with no leaks. Unit restored to full working condition.

Responded to service call for continuously running toilet that persisted after homeowner attempted repair by replacing fill valve flapper. Upon inspection, diagnosed faulty fill valve assembly as root cause of constant water flow. Replaced complete fill valve mechanism and adjusted water level to manufacturer specifications. Tested flush cycle multiple times to ensure proper operation and verified toilet stopped running between flushes. System now functioning correctly with no water waste.

Installed new chrome gooseneck kitchen faucet with dual handles at island sink, connecting supply lines to existing shut-off valves and verifying proper water flow and drainage. All connections tested and confirmed leak-free with no issues detected in the existing under-sink plumbing configuration.

Completed installation of chrome single-handle faucet on Kohler bathroom sink with matching decorative cross-handle angle stop valves and braided stainless steel supply lines. All connections tested and verified leak-free with proper water flow and drainage function confirmed.

Responded to service call for evaluation of potentially broken sewer line at commercial facility. Upon arrival, conducted thorough inspection of the premises to assess the reported drainage issue. Documented existing conditions through comprehensive photographic survey of the mechanical systems and infrastructure present in the space. The inspection revealed a commercial HVAC installation with exposed ceiling-mounted equipment including finned heat exchanger units, ductwork, and associated mounting hardware in what appears to be a mechanical room or service area. Evaluated the structural framework, support systems, and routing of utilities to determine scope of work required for sewer line repair or replacement. Gathered necessary information and visual documentation to prepare detailed estimate for recommended corrective action on the sewer system.

Replaced corroded chrome P-trap assembly under sink due to significant mineral buildup and deterioration of existing fixture. Installed new chrome-plated P-trap with proper slip-joint connections to restore proper drainage and prevent future leaks.