Top-Rated Plumbing Services in Evanston, IL

Responded to a broken kitchen faucet in a century-old residence where the issue had persisted for several days. Upon inspection, discovered a decorative chrome beverage tap with spiral coil design installed at a wet bar station with granite countertop. Examined under-sink plumbing and identified significant water damage and brown staining on cabinet interior walls, indicating active or previous leakage from supply lines or drain connections. Assessed P-trap assembly, supply line connections, and disposal unit for source of leak. Documented existing conditions including moisture damage and plumbing configuration for repair recommendations.

Responded to a clogged sewer line that had been causing issues for two days. Upon arrival, found significant water backup and flooding in the basement utility area affecting the main sewer line assembly. Cleared the blockage in the sewer line using professional drain cleaning equipment, restoring proper flow and drainage. Tested the system to confirm full functionality and began water extraction from the affected basement area.

Responded to drainage issue affecting kitchen sink, dishwasher, and garbage disposal in century-old home. Inspected plumbing assembly beneath double-basin sink, including PVC P-trap configuration, tailpiece connections, and horizontal drain line routing to wall. Assessed electrical connections at junction box and flexible conduit servicing disposal unit. Documented existing plumbing configuration showing standard white PVC trap assembly with proper water seal formation. Evaluated drainage pathway affecting both appliances to determine cause of month-long backup condition and provided recommendations for resolution.

Completed plumbing rough-in installation for under-construction residential space, including PVC drainage system installation with proper pipe mounting and securing to wooden framing. Applied leveling aggregate and prepared subfloor surface for final plumbing fixture placement, with all supply and waste lines positioned according to specifications.

Responded to a clogged bathroom sink call and successfully cleared the blockage. Accessed the P-trap assembly beneath the undermount sink, removed debris causing the obstruction, and verified proper drainage function before completing the service.

Completed initial installation work on combination boiler system in basement utility area, including connection of copper and metal piping, pressure gauges, and associated mechanical components. Follow-up visit required to install 3½-inch test plug for sanitary stack and verify hose spigot installation status, with full-day appointment scheduled for technician experienced with combination boiler systems to finalize remaining connections and complete project.

# Drain and Sewer Estimate Residential Conducted site assessment of underground sewer system following identification of improper existing pipe installation. Investigation revealed defective sewer pipe beneath concrete flooring requiring excavation for proper access and evaluation. Documented deteriorated conditions including exposed PVC piping, compromised floor surfaces with aggregate substrate visible, and white PVC pipe fittings marked STM D2665 NSF-61 lying on gravel bedding. Assessment confirmed concrete removal will be necessary to fully expose the drain line for repair or replacement. Photographic documentation captured the extent of floor deterioration, exposed plumbing infrastructure, and compromised pipe components to support scope of corrective work required.

Accessed corroded horizontal supply line through wall opening to assess pipe condition and identify source of plumbing issue. Documented severely deteriorated metal piping with extensive corrosion, rust buildup, and mineral deposits requiring replacement. Cut access openings in ceiling and wall to expose affected plumbing infrastructure, revealing compromised copper supply lines and associated piping that necessitate full repair and restoration of water distribution system in affected area.

Responded to reported leak from outdoor spigot with low water pressure. Accessed supply line through interior wall opening, located leak at compression fitting on copper pipe run. Repaired connection and secured piping with proper mounting brackets. Also diagnosed and addressed noise issue with third-floor toilet fill valve during tank refill cycle.

Completed faucet service at residential bathroom with pedestal sink installation. Building water supply was shut down at 11 AM to facilitate the work. Serviced dual shut-off valves with red handles connected to copper supply lines, inspecting braided stainless steel flexible hoses and metal hose clamps for proper connection and function. Verified proper operation of hot and cold water supply lines and drainage system components including white corrugated flexible tubes. All plumbing connections beneath sink were inspected and confirmed secure with no visible leaks upon restoration of water service.

Conducted quality assurance inspection of recently completed water repipe installation, water filtration system, and ice maker line connections. Documented plumbing system featuring new copper piping with foam insulation, backflow prevention valve assembly with bypass capability, and proper hot/cold water line identification in basement crawl space area. Verified under-sink P-trap configuration and supply line connections are functioning correctly per installation specifications.

Responded to emergency call for active water leak in kitchen ceiling. Upon arrival, found ceiling already opened with exposed framing and plumbing infrastructure visible. Located failed 1/2" copper water pipe with visible corrosion and green patina in ceiling cavity above kitchen area. Shut off water supply to affected line and removed damaged section of copper piping. Installed new 1/2" copper pipe section using proper fittings and soldered connections to restore water flow. Pressure tested repaired line to verify leak was eliminated and system integrity restored. Confirmed no additional water damage to surrounding pipes or structural components during inspection of exposed ceiling joists and insulation.

Responded to copper piping issue in kitchen of 15-year-old residential property. Performed comprehensive repipe service, replacing deteriorated copper supply lines throughout affected areas. Installed new copper piping with proper support and insulation, integrated with existing HVAC system components in attic space. Verified all connections at water meter, pressure gauge, and main shutoff valves for proper flow and pressure. System tested and confirmed operational with no leaks detected.

Completed plumbing finish work in residential property involving the installation and trimming of two shower valves. Site assessment confirmed this was a completion appointment rather than an estimate visit. Successfully installed trim components for both shower valve assemblies, ensuring proper fit and function in accordance with plumbing code requirements.

Completed plumbing fixture installation involving aged brass piping system with T-joint configuration and shutoff valve mechanism. Addressed significant corrosion and oxidation on existing pipe connections, replaced deteriorated sections showing greenish-black patina and mineral buildup, and secured new fittings with proper threaded connections and coupling joints to restore functionality.

Responded to kitchen sink service call for reported cold water supply issues and faucet leak. Upon inspection, identified leak at faucet base and compromised cold water line connection. Disassembled single-handle brushed nickel faucet assembly to access supply lines and mounting hardware. Replaced worn cartridge seals and tightened supply line connections beneath sink. Verified proper drainage through existing PVC trap assembly and garbage disposal connection. Tested hot and cold water flow at full pressure, confirmed leak elimination, and ensured all connections were secure with no drips. System restored to full operational status.

Replaced cracked galvanized waste arm drain pipe connected to main vertical stack with new PVC drainage system for kitchen sink and garbage disposal. Modified cabinet base to access vertical stack behind cabinetry, then installed new drain pipes and P-traps for both fixtures. All connections tested and verified leak-free upon completion.

Responded to callback for plumbing system inspection in basement area with reported water infiltration issues. Upon arrival, documented severely deteriorated cast iron drain stack assembly showing extensive corrosion, pitting, and mineral deposits throughout all visible sections. The vertical and horizontal pipe connections exhibited heavy surface degradation with white calcium buildup indicating prolonged moisture exposure and age-related deterioration of the cast iron material. Assessed active water damage on concrete basement floor with multiple wet areas and discoloration patterns. Placed absorbent materials at base of central plumbing stack to contain ongoing moisture. Photographed condition of corroded flanged connections and T-joints for documentation purposes. The plumbing infrastructure displayed signs of decades of use requiring immediate attention to prevent further water damage and potential system failure.

Responded to emergency call for sewage seepage from basement cleanout in 100-year-old home. Upon arrival, found active water discharge from main drain cleanout causing significant flooding in basement utility closet with water extending onto adjacent carpeted areas. Performed main drain cleanout service to clear blockage in aging sewer line, restoring proper drainage and stopping the seepage. Advised property owner on condition of century-old plumbing system and potential need for future line inspection or replacement due to age-related deterioration.

Performed camera inspection of bathroom tub drain line to investigate slow drainage and verify previous repair work following disputed damage claim to unit below. Inspected bathroom sink P-trap assembly and identified active leak at pipe connection, noting water staining on fixture underside and aging brass shut-off valves with significant corrosion. Documented existing plumbing conditions with photographic evidence of white PVC drain configuration, corroded supply valves, and flexible braided supply lines beneath wall-mounted fixture.