Quality Plumbing Services in Skokie, IL You Can Count On

Responded to exterior hose bib leak at brick building foundation. Upon inspection, found recently replaced hose bib was loose at wall connection point, causing water seepage on exterior side of mounting location. Tightened mounting hardware, resealed connection point between spigot and brick wall penetration, and tested for proper operation and water-tight seal under pressure.

Responded to same-day service request for bathroom fixture replacements. Successfully replaced bathroom sink hardware, including new supply lines and shut-off valves, removing aged brass fittings and installing updated components. Installed new bidet fixture and replaced toilet seat as requested. All plumbing connections were secured and tested for proper operation and leaks.

Performed plumbing repair requiring wall access to address drain line issues. Cut access opening in tiled wall to expose defective PVC drain pipe assembly. Replaced damaged sections of vertical drain line using new PVC pipe, flexible fernco couplings, and stainless steel hose clamps to ensure proper watertight connections. Verified all connections were secure and properly aligned with existing plumbing infrastructure.

Replaced chrome-plated bathtub spout with diverter mechanism. The new fixture features a polished finish and includes a diverter knob for redirecting water flow between the tub spout and showerhead, restoring proper functionality to the bathing system.

Installed new KitchenAid Continuous Feed 1/2 HP garbage disposal unit under kitchen sink. Connected unit to existing plumbing system with chrome P-trap and drain assembly, ensuring proper mounting and secure electrical connection. Provided customer with manufacturer's guidelines on proper disposal usage, including acceptable items such as food scraps, fruit and vegetable waste, and small bones, while advising against disposal of oils, grease, and non-food materials to ensure optimal performance and longevity of the unit.

Responded to service call for leaking toilet and sump pump replacement assessment. Upon arrival, conducted thorough inspection of bathroom plumbing fixtures and basement drainage system. Evaluated existing sump pump condition and determined replacement requirements based on current operational deficiencies. Documented bathroom renovation area showing active construction with exposed plumbing infrastructure, including visible gas meter connections and aged piping systems requiring attention. Photographed water damage patterns on concrete flooring indicating potential drainage issues related to sump pump failure. Assessed plumbing rough-in work and existing pipe configurations to determine optimal sump pump installation approach. Provided comprehensive estimate for sump pump replacement including removal of existing unit, installation of new high-capacity sump pump with appropriate discharge piping, and verification of proper drainage flow to prevent future water accumulation and structu

Inspected plumbing system and wall-mounted utility access point. Documented existing conditions including aged mechanical infrastructure with deteriorated pipe insulation, pressure relief valve assembly, and multiple water supply lines. Return visit scheduled to complete additional work per customer request.

Responded to complaint of foul odor emanating from basement drain. Upon inspection, removed toilet flange assembly to access drain line. Discovered accumulated debris and buildup within the drain system causing the malodorous condition. Extracted foreign material and organic matter from the line. Cleaned flange assembly and surrounding components, removing sediment and grime. Cleared obstruction to restore proper drainage flow and eliminate odor source. Reassembled components and verified system function upon completion.

Responded to warranty callback for toilet leaking waste water at base. Performed complete pull and reset of toilet fixture. Removed toilet from flange, inspected and replaced defective wax ring that was causing improper seal. Cleaned flange surface, installed new wax ring, repositioned and secured toilet to floor with proper compression. Tested fixture with multiple flushes to verify complete seal with no leakage present.

Responded to warranty callback for toilet backup into bathtub occurring two hours after completion of major plumbing work. Accessed cast iron drain and vent system through wall cavity to investigate drainage obstruction. Inspected deteriorated piping system showing significant corrosion and age-related wear, with visible rust accumulation on vertical and horizontal drain lines at pipe junction with yellow-capped valve assembly.

Responded to report of exterior hose bib leaking inside the home. Upon arrival, inspected the outdoor spigot assembly mounted on brick exterior wall and traced water intrusion to failed valve stem packing. The existing galvanized piping showed significant corrosion and weathering consistent with age and outdoor exposure. Disassembled the gate valve assembly, replaced deteriorated packing material and stem washers, reassembled unit, and tested operation under full pressure to confirm leak was eliminated with no interior water penetration.

Responded to emergency plumbing service call for burst pipe repair in residential basement living area. Created ceiling and wall access points to reach compromised drain system components. Replaced severely corroded metal drain trap assembly showing significant oxidation and mineral buildup with new PVC P-trap configuration. Applied proper primer and secured all connections to code. Addressed water damage concerns by exposing affected structural areas including ceiling joists and wall cavities to ensure proper assessment and drying. Rerouted and secured existing flexible conduits during repair process. Verified all drain connections for proper flow and seal integrity upon completion.

Responded to service call for overflowing drum trap in basement ceiling that had previously leaked through light fixtures. Upon inspection, identified improperly executed prior repair with inadequate adhesive application on trap assembly. Accessed plumbing system through existing ceiling opening to assess drum trap condition and surrounding PVC drainage lines. Documented existing infrastructure including horizontal waste lines, support brackets, and connection points in crawlspace area. Evaluated structural integrity of repair zone and confirmed cessation of active leaking. Provided comprehensive assessment and repair recommendations for proper drum trap replacement or remediation to ensure code-compliant installation and prevent future overflow incidents.

Replaced defective shut-off valves beneath bathroom vanity and successfully installed new double vanity unit with white cabinet, integrated undermount sink, and brushed nickel faucet fixtures. All water supply lines and drain assembly were properly connected, tested for leaks, and confirmed operational upon completion.

Performed comprehensive inspection of EverReady flood control system at residential property constructed in 1950. Accessed exterior sump pit and verified operational status of submersible pump and associated electrical components. Inspected pit interior for structural integrity, noting age-appropriate staining on concrete walls and proper water level at basin bottom. Confirmed PVC discharge piping configuration and verified float switch cable positioning. System components showed normal wear consistent with home age but maintained functional operation. Photographically documented pit condition and equipment placement for service records.

Responded to a rescheduled priority appointment for a reported small leak under the bathroom sink. Upon inspection, identified water supply line issue at the wall connection. Assessed the flexible supply line and shut-off valve for signs of leakage or deterioration. Documented existing water damage evidenced by brownish discoloration on the white ceramic tile flooring near the plumbing fixtures, indicating previous or ongoing moisture intrusion that required attention to prevent further damage to the bathroom floor and surrounding areas.

Responded to emergency call for water leak affecting basement ceiling when outdoor spigot was activated. Accessed plumbing through ceiling opening to locate source of leak in supply line serving exterior hose bib. Installed new ball valve with red handle and brass elbow fitting on copper supply line within ceiling cavity. Tested system for proper operation and verified no additional leaks present after repairs completed.

Conducted comprehensive inspection of residential water heater following customer reports of operational issues. Evaluated unit condition, plumbing connections, and overall system integrity. Documented existing installation showing age-related wear including corroded copper piping, oxidized fittings, and evidence of previous moisture accumulation in drain pan. Coordinated scheduling for flood control pump installation and acid neutralizer system work as requested by homeowner.

Responded to emergency basement flooding caused by failed sump pump. Upon arrival, found standing water in utility room with inoperative pump system. Removed failed pump unit from sump basin, which showed significant sediment accumulation and debris buildup. Cleaned sump pit interior, removing dirt and standing water. Installed new replacement sump pump with proper float switch configuration and electrical connections. Tested system operation to ensure proper activation and discharge through existing PVC drainage piping. Verified all connections were secure and system cycled correctly. Basement water level returned to normal with pump functioning as designed.

Responded to warranty callback for leaking toilet wax ring. Upon arrival, inspected toilet base and confirmed active leak at floor connection. Removed and replaced defective wax ring with new premium seal. Reinstalled toilet, ensuring proper alignment and secure mounting. Tested flush operation and verified complete seal with no water seepage at base connection.