Top-Rated Plumbing Services in Evanston, IL

Successfully removed the existing hose bib and installed a new PRIER quarter-turn frost-free valve with green handle. The water supply was shut off during the repair, and the new valve was properly soldered onto the copper pipe connection to ensure a leak-free seal.

Completed sump pump replacement in basement utility area serving minor seepage and laundry discharge. Removed existing battery backup system and hauled off site. Installed new sump pump with necessary piping adaptations to existing 1-1/2" copper drain and vent lines. Installed quiet check valve to prevent backflow. Performed ejector pump replacement in secondary sump pit. Removed existing ejector pump and hauled off site. Installed new ejector pump with adaptations to existing 2" PVC discharge piping. Installed quiet check valve and properly sealed pit lid to ensure proper operation and prevent odor escape. All installations completed with 2-year parts warranty and lifetime workmanship warranty. Warranty coverage void if foreign objects discovered during future service calls.

Responded to report of sump pump leaking when washing machine drains. Inspected sump pump system, discharge piping, and battery backup unit in basement utility area. Evaluated washing machine drain connection to identify source of water intrusion into sump basin. Assessed condition of existing battery backup system and verified proper operation of pump float switch and check valve assembly.

Replaced failed outdoor hose spigot that was leaking and not delivering water flow when hose was connected, damage likely caused by freeze conditions from previous winter. Accessed supply line through interior ceiling, installed new frost-free sillcock with proper insulation on exterior copper piping using red and black insulating materials, and restored full water flow to outdoor connection point.

Responded to emergency plumbing call involving flooding from outdoor spigot that caused water damage to kitchen and basement. Inspected and repaired copper supply line connections and brass fittings at spigot penetration point through exterior wall. Addressed multiple fixture issues in downstairs bathroom including restoration of hot water supply to shower and repair of non-functioning cold water valve at bathroom faucet. Verified proper operation of all affected fixtures and confirmed no active leaks at repaired connections.

Completed priority plumbing repairs in residential bathroom including replacement of bathroom faucet fixture, installation of new shower cartridge in multi-function shower system with rain head and body spray jets, and replacement of damaged ceramic sink basin. All fixtures tested and verified operational upon completion.

Removed existing water heater from basement utility area and set aside per sold repair agreement. Unit was disconnected from copper supply lines and electrical connections, then relocated to allow for new equipment installation.

Responded to service call for non-functioning garbage disposal unit beneath kitchen sink. Upon inspection, found existing disposal unit inoperable and requiring replacement. Successfully removed failed disposal unit and installed new garbage disposal, ensuring proper electrical connections and secure mounting to sink drain assembly. Verified all plumbing connections including P-trap alignment and tested unit for proper operation and drainage. Also assessed kitchen sink faucet and under-sink water filtration system per customer request for future replacement consideration.

Installed bathroom exhaust fan and light fixture combination unit in residential bathroom. Verified proper ventilation operation and secured ASTM-rated plastic supply line in attic space with appropriate mounting hardware to structural framing members.

Replaced heavily corroded copper water supply piping that exhibited significant rust deterioration and mineral buildup. Installed new copper pipe assembly with ball valve shutoff, compression fittings, and proper connections to existing plumbing system mounted on concrete block wall. All associated fittings included with lifetime workmanship warranty provided.

Responded to afternoon appointment request for bathroom plumbing repair. Upon inspection, identified a severely deteriorated drain gasket with significant wear, cracking, and degradation around the edges. The gasket showed brittle material failure with pieces peeling away from the main structure. Brown staining and mineral deposits were visible around the drain opening on the white tile surface, indicating prolonged water exposure and potential seal failure. Documented existing conditions with photographs for service records. Repair work was sold and scheduled for completion.

Installed new PRIER outdoor spigot valve assembly with quarter-turn shut-off mechanism on wooden deck surface. Completed installation of brass valve body with copper pipe connection and threaded outlet, ensuring proper placement and secure mounting for exterior water access.

Responded to a leaking outdoor spigot that developed when water was turned on for the spring season. Located and accessed the copper supply line running from the basement through the deck structure to the exterior hose bib. Removed the failed spigot assembly, which showed signs of freeze damage to the valve body and internal components. Replaced the outdoor faucet with a new frost-free sillcock, ensuring proper pitch for drainage and secure mounting to prevent future leaks.

Responded to water leak complaint originating from kitchen sink and affecting the unit below. Conducted visual inspection of kitchen sink area and under-sink plumbing configuration, documenting conditions with photos. Advised that access to both the upper unit (source) and lower unit (affected area) would be required to complete thorough leak investigation and determine exact source of water intrusion. Awaiting confirmation of access to lower unit before proceeding with comprehensive leak location service and necessary repairs.

Responded to clogged drain service call at utility room location. Upon inspection, identified severely corroded horizontal drain pipe extending from brass fitting beneath utility sink. Pipe exhibited extensive deterioration with dark brown and black surface corrosion, with visible debris accumulation on floor tiles indicating drainage issues. Documented existing conditions including white PVC vertical drain line connection to corroded brass valve assembly. Return visit scheduled per management directive to complete necessary pipe replacement work. Additional technician assigned for Farrell fitting replacement with materials list to be coordinated prior to return service appointment.

Responded to report of water leaking through upstairs bathroom ceiling light fixture/exhaust fan combination unit for approximately 1.5 weeks in an 80+ year old building. Performed visual inspection of bathroom ceiling, ventilation system, and surrounding plumbing fixtures including wall-mounted shut-off valves. No active water flow was observed at time of inspection, and no visible water damage was evident on ceiling or wall surfaces despite reported leak duration.

Conducted site assessment for drain tile installation in basement laundry area. Evaluated existing floor conditions, including concrete surface with visible cracking and floor drain location. Documented structural access points and utility routing spaces to determine optimal drain tile placement and estimate scope of work required for proper basement waterproofing system installation.

Responded to service call for residential water heater with no hot water production throughout home. Upon arrival, inspected 70-year-old home's utility closet containing tanked gas water heater unit. Performed diagnostic assessment of water heater system, examining gas control valve assembly, thermocouple connections, and pilot light operation. Checked gas supply line, brass fittings, and all copper piping connections for proper function. Evaluated temperature and pressure relief valve, inspected flue venting system, and verified proper combustion air supply. Tested electrical connections including thermocouple wiring and safety controls. Assessed overall unit condition including tank integrity, insulation, and manufacturer specifications label. Documented equipment configuration with utility room layout showing water heater positioned adjacent to HVAC furnace system with metal ductwork overhead. Restored hot water service to residence and verified proper operation of heating elements

Completed on-site assessment for basement bathroom plumbing remodel. Evaluated existing bathroom configuration including bathtub with chrome fixtures, shower assembly, and tiled surround to determine scope of work for renovation. Inspected water heater installation, copper supply lines, shutoff valves, and electrical connections in utility area to assess current plumbing infrastructure and compatibility with proposed bathroom modifications. Documented existing conditions through photography and provided comprehensive estimate for complete bathroom plumbing remodel.

Completed toilet installation using customer-supplied fixture at afternoon appointment. Removed existing toilet, verified proper floor flange condition and measurements, and installed new white porcelain toilet with appropriate wax ring seal. Connected water supply line from wall-mounted shutoff valve to tank fill valve using flexible supply hose, ensuring proper alignment and leak-free connections. Verified toilet was level, properly secured to floor flange, and tested flush operation and tank refill function to confirm successful installation.